Prep-node Command
Command: prep-node
This command prepares a node to be ready to be added to a cluster. The command does the following:
- Checks resources and access (Ports, CPU, RAM, HDD, SUDO, Clock Skew)
- Securely connects to a list of nodes specified
- Installs all the required prerequisites on the nodes
- Installs Platform9 host agent and other required software on the nodes
- Authorizes the nodes to be associated with the PMK management plane
This command is useful if you wish to prepare your nodes with the required prerequisites using the CLI, and then use the PMK UI to finish cluster creation.
When you create a cluster using PMK UI, the UI recommends that you use the CLI to run this command on all the nodes you wish to add to the cluster, then come back to the UI to finish cluster creation.
Syntax Example
pf9ctl check-node [flags]All Available Commands and Flags
x
$ pf9ctl check-node --helpCheck if a node satisfies prerequisites to be ready to be added to a Kubernetes cluster. Read more at https://platform9.com/blog/support/managed-container-cloud-requirements-checklist/Usage: pf9ctl check-node [flags]Flags: -h, --help help for check-node -i, --ip strings IP of host to be prepared -p, --password string ssh password for the nodes -c, --skip-checks Will skip optional checks if true -s, --ssh-key string ssh key file for connecting to the nodes -u, --user string ssh username for the nodesGlobal Flags: --verbose print verbose logspf9ctl prep-node -hPrepare a node to be ready to be added to a Kubernetes cluster. Read more at http://pf9.io/cli_clprep.Usage: pf9ctl prep-node [flags]Flags: -h, --help help for prep-node -i, --ip strings IP address of host to be prepared --mfa string MFA token -p, --password string ssh password for the nodes (use 'single quotes' to pass password) -r, --remove-existing-pkgs Will remove previous installation if found (default false) -c, --skip-checks Will skip optional checks if true --skip-connected If the node is already connected to the PMK control plane, prep-node will be skipped -o, --skip-os-checks Will continue prep-node even if os version checks fail -s, --ssh-key string ssh key file for connecting to the nodes -e, --sudo-pass string sudo password for user on remote host -u, --user string ssh username for the nodesGlobal Flags: --log-dir string path to save logs --no-prompt disable all user prompts --verbose print verbose logspf9ctl prep node has a --skip-os-checks flag that can be used to bypass the operating system check.
Command Examples
Prep Local Node
pf9ctl prep-node2021-02-22T14:14:53.6344Z INFO Loading configuration details2021-02-22T14:14:54.4674Z INFO Disabling swap2021-02-22T14:14:54.4732Z INFO Removing swap in fstab2021-02-22T14:14:54.5108Z INFO Downloading installer (this might take a few minutes...)2021-02-22T14:15:16.4673Z INFO Platform9 packages installed successfully2021-02-22T14:15:16.4674Z INFO Initialising the host2021-02-22T14:16:16.9997Z INFO Host successfully attached to the Platform9 control-planePrep Remote Node
pf9ctl prep-node -i 10.128.242.250 -u ubuntu2021-02-22T09:17:51.0003Z INFO Loading configuration detailsEnter Password:2021-02-22T09:17:55.5474Z INFO Disabling swap2021-02-22T09:17:55.5775Z INFO Removing swap in fstab2021-02-22T09:17:55.6354Z INFO Downloading installer (this might take a few minutes...)2021-02-22T09:18:17.639Z INFO Platform9 packages installed successfully2021-02-22T09:18:17.6391Z INFO Initialising the host2021-02-22T09:19:18.1018Z INFO Host successfully attached to the Platform9 control-planeFlag Examples and Information
| Flag | Type | Required/Optional | Description |
|---|---|---|---|
-u , --user | String | Optional | Username for nodes. Required if you are creating a multi-node cluster, so the CLI can authenticate with each node. Refer to SSH Setup for Remote Nodes under PMK CLI Overview for more information. |
-p , --password | String | Optional | Password for node. You need to specify either the password or provide the password during execution if you're running the command to connect to remote nodes. Refer to SSH Setup for Remote Nodes section under PMK CLI Overview for more information. |
-c, --skip-checks | String | Optional | If set to true, skip-checks will bypass prompts for optional checks during prep-node. This flag is used for cases where a node is added using a script and is automated, allowing for prompts to be bypassed. |
-s , --ssh-key | String | Optional | SSH private key for remote nodes. Refer to SSH Setup for Remote Nodes section under PMK CLI Overview for more information. |
-i , --ip | String | Required | IPs of the nodes you wish to execute prep-node. You need to specify at least one IP address for the prep-node command to work. Repeat this option multiple times to specify multiple nodes to be prepared. If you wish to also prepare the current node, specify it as ‘localhost’ or specify the current node’s IP address |
--help | Show this message and exit. |
Was this page helpful?